LinkedIn AutoCAD Skill Assessment Answer 2023

In this article, you will find LinkedIn AutoCAD Skill Assessment Answer. Use “Ctrl+F” To Find Any Questions or Answers. For Mobile Users, You Just Need To Click On Three dots In Your Browser & You Will Get A “Find” Option There. Use These Options to Get Any Random Questions answered.

As you already know that this site does not contain only the Linkedin Assessment Answers here, you can also find the solution for other Assessments also. I.e. Fiverr Skills Test answersGoogle Course AnswersCoursera Quiz Answers, and Competitive Programming like CodeChef Problems Solutions, & Leetcode Problems Solutions.

LinkedIn AutoCAD Skill Assessment Answer
LinkedIn AutoCAD Skill Assessment Answer

100% Free Updated LinkedIn AutoCAD Skill Assessment Certification Exam Questions & Answers.

LinkedIn AutoCAD Skill Assessment Details:

  • 15 – 20 multiple-choice questions
  • 1.5 minutes per question
  • Score in the top 30% to earn a badge

Before you start:

You must complete this assessment in one session — make sure your internet is reliable.
You can retake this assessment once if you don’t earn a badge.
LinkedIn won’t show your results to anyone without your permission.
After completing the exam, you will get the verified LinkedIn AutoCAD Skill Assessment Badge.

LinkedIn AutoCAD Skill Assessment Answer:-

Q1. You have an application using a 100 GB MySQL database that you are migrating into AWS. What should you consider when deciding between whether to host the database on RDS for MySQL or Aurora?

  •  cost
  •  ease of maintenance vs. granularity of control
  •  all of these answers
  •  the current storage engine used by the application, such as InnoDB or MyISAM

Q2. The LAYOFF command turns off the layer of any selected object. What happens if you select an object on the current drafting layer?

  •  AutoCAD turns off the current drafting layer and sets up a new layer in the Layer Properties Manager.
  •  AutoCAD turns off the current drafting layer and sets the current drafting layer to Layer 0 (zero).
  •  AutoCAD prompts you if you want to turn off that layer.
  •  AutoCAD turns off the current drafting layer with no prompt.

Q3. Sometimes you will need to match properties of one object to another using the Match Properties (MATCHPROP) command. When matching the properties of an existing viewport to a new one, which setting do you turn off in Match Properties to ensure that the viewport scale is not matched across to the new viewport?

  •  Special Properties/Viewport
  •  Basic Properties/Layer
  •  Special Properties/Center object
  •  Basic Properties/Linetype Scale

Q4. When using the Multiple Points (POINT) command, which specific AutoCAD setting should you change from the default setting?

  •  Change your layer (LAYER) so that points can be seen easily.
  •  Change your color (COLOR) so that points can be seen easily.
  •  Change your linetype (LINETYPE) so that points can be seen easily.
  •  Change your point style (PTYPE) so that points can be seen easily.

Q5. When working in a layout, if a viewport is activated and locked and you accidentally zoom in or out, what happens to your viewport scale?

  •  Nothing. The viewport scale remains the same.
  •  The viewport scale returns to the default 1:1 scale.
  •  The viewport scale changes to the next available standard scale.
  •  The viewport scale changes to a nonstandard scale.

Q6. Dynamic Input (DYNMODE) is switched on by default. Which function key do you use to control the Dynamic Input toggle?

  •  F8
  •  F1
  •  F9
  •  F12 (Windows) or Shift+Command+D (Mac)

Q7. What specific annotation setting must be in place in order to place a text annotation in a drawing?

  •  a multileader style
  •  a dimension style
  •  a table style
  •  a text style

Q8. In a standard AutoCAD installation, what does rolling the mouse backward do?

  •  zoom out
  •  zoom left
  •  zoom in
  •  zoom right

Q9. When an inserted block is selected, a single grip is displayed on the block, as shown in the image below. What is this point known as when the block is created with the Create Block (BLOCK) command?

  •  origin point
  •  zero point
  •  block origin point
  •  insertion point

Q11. One of the benefits of a locked viewport in a layout is that you can activate it and work through the viewport on the objects and annotation in the model space, without worrying about affecting the viewport scale. What is the space in the activated viewport commonly known as when you do this?

  •  scaled model space
  •  layout model space
  •  floating model space
  •  viewport model space

Q12. When using annotative scaling with dimensions and an annotative dimension style, which two variables need to match for the dimensioning to display in a scaled viewport?

  •  drawing scale and viewport scale
  •  insertion scale and viewport scale
  •  block scale and viewport scale
  •  annotation scale and viewport scale

Q13. You can share tool palettes with other AutoCAD users, provided that the palette source drawing location does not change. What file do you need to share to ensure that another user is using the same tool palette?

  •  Shared Tool Palette (STP) file
  •  New Tool Palette (NTP) file
  •  Exported Tool Palette (XTP) file
  •  User Tool Palette (UTP) file

Q14. A crossing selection selects what objects?

  •  only the objects completely outside the crossing selection
  •  only the objects not encompassed nor crossed by the crossing selection
  •  only the objects completely encompassed by the crossing selection
  •  only the objects completely encompassed and crossed by the crossing selection

Q15. You can dimension objects in AutoCAD from the Annotation panel on the Home tab of the ribbon. Where else can you dimension on the ribbon?

  •  the Dimension panel on the Annotate tab
  •  the Dimensional panel on the Parametric tab
  •  the Palettes panel on the View tab
  •  the Reference panel on the Insert tab

Q16. When drawing a group of line segments with the LINE command, which command on the right-click shortcut menu allows you to form a closed boundary and snap back to the start point of the first line segment?

  •  CLOSE
  •  ENTER
  •  UNDO

Q17. AutoCAD allows you to create elliptical arcs in drawings. When creating one of these arcs, which default drafting rule do you need to follow?

  •  Arcs follow a counterclockwise (positive angle value) path.
  •  Arcs follow a clockwise (positive angle value) path.
  •  Arcs always follow a path with a negative angle value.
  •  Arcs follow a user-defined path.

Q18. Linetype Scale (LTSCALE) is applied to what sort of linetypes in AutoCAD drawings?

  •  any objects that utilize a continuous linetype
  •  any objects that utilize any linetype
  •  any objects that utilize a dashed or dotted linetype, or a combination of both
  •  any objects that utilize a colored or continuous linetype, or a combination of both

Q19. By default, all of the ARRAY commands make their respective arrays associative and group the selected objects in the array. What command would you use to convert the selected array into individual AutoCAD objects?


Q20. Which command opens a folder where you can start the Add-a-Plotter wizard?


Q21. Dimensions in a drawing can be spaced automatically with the Adjust Space (DIMSPACE) command. You can specify a distance between spaced dimensions or you can use the Auto option. What does Auto do to the dimensions being spaced?

  •  calculates the Auto space as one and a half times (1.5x) the text height of the text in the dimension style being used
  •  calculates the Auto space as twice the distance between the first and second dimensions selected for spacing
  •  calculates the Auto space as three times (3x) the text height of the text in the dimension style being used

Q22. There is often a need to hide or isolate selected objects, especially in complex drawings when detailing geometry. Where would you find the Isolate menu option—which is not on the ribbon?

  •  the status bar
  •  a right-click shortcut menu after object selection
  •  the Quick Access toolbar (QAT)
  •  the navigation bar

Q23. System variables can be monitored in AutoCAD. When monitored, they can also be reset to preferred values. What command is used to control these system variables?


Q24. When using HIDE or ISOLATE in a drawing, the objects are either hidden or isolated for clarity. What happens to the layers of hidden or isolated objects?

  •  The hidden and isolated object layers go on to their own layer.
  •  The isolated object layers stay on; all other layers are turned off in the Layer Properties Manager.
  •  Nothing happens.
  •  The hidden object layers turn off; all other layers stay on in the Layer Properties Manager.

Q25. When scaling a drawing from imperial feet and inches to metric millimeters, what scale factor do you use in the SCALE command, before adjusting your units settings?

  •  25.4
  •  0.03937
  •  12.0
  •  0.08333

Q26. When drawing line objects in a drawing, you may use coordinates to define distance and direction. One type of coordinate is a relative coordinate, which is relative to the last point specified—often the second point when drawing a line using the LINE command. What prefix symbol should you type in front of 2D X,Y coordinates to ensure that AutoCAD knows it is a relative coordinate input?

  •  #X,Y
  •  @X,Y
  •  R-(X,Y)
  •  REL X,Y

Q27. Center Mark (CENTERMARK), a new annotation tool for circles and arcs, provides an associative center mark that can be edited easily and remains associative to its geometry. Which AutoCAD system variable controls the extension line overshoots that go past the circumference of the circle or arc?


Q28. Where would you find the Application menu in AutoCAD?

  •  bottom-left corner of the screen
  •  bottom-right corner of the screen
  •  top-right corner of the screen
  •  top-left corner of the screen

Q29. When plotting in AutoCAD, the default plotting style is a color-dependent plot style table (CTB). You can also use named plot style tables (STB). You can change a CTB drawing to an STB drawing using which command?


Q30. Single-line text can be added anywhere in a drawing. If middle-center justified text with height of 0 was required in model space that was 300 millimeters high, what workflow would you use?

  • [ ]
  1. Right-click and select Justify.
  2. Select MC.
  3. Pick a middle point.
  4. Type text.
  5. Specify the height.
  6. Specify the rotation angle.
  • [x]
  1. Right-click and select Justify.
  2. Select MC.
  3. Specify the height.
  4. Specify the rotation angle.
  5. Pick a middle point.
  6. Type text.
  • [ ]
  1. Right-click and select Justify.
  2. Select MC.
  3. Specify the height.
  4. Specify the rotation angle.
  5. Pick a middle point.
  6. Type text.
  • [ ]
  1. Right-click and select Justify.
  2. Select MC.
  3. Pick a middle point.
  4. Drag the mouse to set the height.
  5. Drag the mouse to set the rotation angle.
  6. Type text.

Q31. A circle has five grips: a center grip and four quadrant grips. When using the Tan Tan Radius (TTR) method to draw a circle in a right-angled corner, which of the two quadrant grips will be touching other objects?

  •  the two grips that also act as the tangents in the TTR circle command
  •  the bottom and left grips the
  •  top and right grips
  •  the center and top grips

Q32. The Quick Access toolbar (QAT) is located in the top left of the AutoCAD application window. Which two commands in the QAT allow you to go backward and forward in your AutoCAD workflow?

  •  Left and Right
  •  Undo and Redo
  •  Rewind and Fast
  •  Forward Unfix and Fix

Q33. When you are in a drawing and want to make an object’s layer the current drafting layer, what command can you use?

  •  Make Current (LAYMCUR)
  •  Change individual properties in the Properties panel.
  •  Match Properties (MATCHPROP)
  •  Match Layer (LAYMCH)

Q34. AutoCAD uses coordinates as the basis of all drawings. The coordinate system is always displayed in the bottom-left corner of the Model tab. In a regular 2D drawing, what axis notation is used for the horizontal and vertical coordinates?

  •  X = horizontal, Y = vertical
  •  H = horizontal, V = vertical
  •  A = horizontal, B = vertical
  •  1 = horizontal, 2 = vertical

Q35. When using coordinates in your drawings, you may need to get an exact coordinate value of a point. For example, it might be the corner of an object for setting out purposes, or the center of a circle for modifying the circle’s position. What command do you use to obtain a point’s exact coordinate value?

  •  Object Snaps (OSNAP)
  •  Distance (DIST)
  •  ID Point (ID)
  •  List (LIST)

Q36. The DONUT command creates donut-shaped drawing objects. Which two values are needed to place a donut on a drawing?

  •  internal and external quadrants
  •  internal and external circumference
  •  internal and external diameter
  •  internal and external radius

Q37. An inscribed polygopoln gives you what type of point at the end of the polygon radius?

  •  a node
  •  a midpoint
  •  a vertex
  •  a center point

Q38. In order for object snap tracking to function effectively, what other drafting setting must be switched on?

  •  Snap and Grid
  •  Dynamic Input
  •  Object Snaps
  •  Polar Tracking

Q39. When you use the ARRAY command to create copies of objects in AutoCAD, what do you use to orient a rectangular array?

  •  center point and rotation angle
  •  X and Y coordinates
  •  Grid and Snap values
  •  rows and columns

Q40. What type of coordinate is given when using the ID Point command?

  •  polar—relative to the last center point selected
  •  absolute—relative to the origin 0,0
  •  relative—relative to the last point selected
  •  angled—relative to the last angle of the last object selected

Q41. When working with objects in your drawings, you normally define their properties via their respective layers. However, you can define individual object properties with the Properties panel on the Home tab of the AutoCAD ribbon. Individual color and linetype can be defined there, along with what other typical object property?

  •  description
  •  plottable or not plottable
  •  linetype scale
  •  lineweight

Q42. The Text Align (TEXTALIGN) command does more than just align text vertically or horizontally. Which TEXTALIGN setting allows you to set up evenly aligned text to a defined spacing in a drawing?

  •  setting the spacing distance in the Properties palette
  •  setting the spacing distance on the right-click shortcut menu
  •  the Distribute option
  •  the Set Spacing option

Q43. When utilizing named views in the Model tab to navigate, why should you keep an eye on your current drafting layer?

  •  Each named view has its own current drafting layer.
  •  Each named view can be saved with a layer snapshot, which might change your current drafting layer.
  •  Each named view has its own current drafting layer, with the layer name being the same as the name of the named view.
  •  Each named view changes the current drafting layer to a default drafting layer.

Q44. When using palettes in AutoCAD, why would you dock a palette and then use the auto-hide function?

  •  to make sure AutoCAD works properly
  •  to isolate all the blocks you are using in the current drawing
  •  to stop anyone seeing which AutoCAD palettes you are using
  •  to automatically hide the palette content and display only the docked palette title bar

Q45. The navigation bar is normally on by default and is located to the right-hand side of the drawing area. Which variable controls the display of the navigation bar, and to what value does it need to be set for the navigation bar to display on the screen?

  •  The NAVBARDISPLAY value should be set to 1
  •  The NAVBARDISPLAY value should be set to 0.
  •  The NAVIGATIONBARDISPLAYON value should be set to 1.
  •  The NAVIGATIONBARDISPLAYON value should be set to 0.

Q46. In a complex drawing, it is sometimes difficult to select the geometry you wish to modify. You might want to move, scale, or rotate geometry and make sure the appropriate objects are selected. You can do this with window and crossing selections, but what other selection method can make this easier?

  •  SELECT (S)
  •  LAST (L)
  •  FENCE (F)

Q47. When working with layers in your drawings, you may regularly go to the Layer drop- down menu on the Layers panel on the Home tab of the ribbon. Which part of the AutoCAD interface can you customize to allow the Layer drop-down menu to be available regardless of which ribbon tab you are currently using?

  •  the status bar
  •  the navigation bar
  •  the Quick Access toolbar (QAT)
  •  the info bar

Q48. When drafting with object snaps and object snap tracking, what other drafting setting can you use to set object snap tracking points?

  •  Polar Tracking (POLAR)
  •  Grid (GRID)
  •  Dynamic Input (DYNMODE)
  •  Snap (SNAP)

Q49. When using the MOVE or COPY command, what is the first point that you must select?

  •  a displacement point
  •  an endpoint
  •  a base point
  •  a midpointa

Q50. When using the OFFSET command, you specify an offset distance and then select the object you want to offset. How do you then specify which side of the original object to offset?

  •  Use the Tab key to alternate which side you want to offset to. Then press Enter (Windows) or Return (Mac) to confirm.
  •  Move the cursor to the appropriate side of the original object and the OFFSET command automatically offsets that side.
  •  Right-click and use options on the shortcut menu.
  •  Click to the side of the original object where you want the offset object to appear.

Q51. When using the ELLIPSE command with the Axis, End, and Center methods, how many axes are needed to form an ellipse?

  •  eight
  •  two
  •  six
  •  four

Q52. When hatching in a drawing with the Hatch (HATCH) command and the pick points selection method, what hatch setting needs to be switched OFF in order to make sure that all hatch boundaries selected form one hatch object?

  •  Create Separate Hatches
  •  Associative Boundaries
  •  Set the HATCHMULTIPLE variable to 0 (OFF).
  •  Set the HATCHMULTIPLE variable to 1 (ON).

Q53. AutoCAD allows you to select individual objects cumulatively to create a selection set. You can remove individual objects from that selection by using a mouse click combined with which keystroke?

  •  Tab
  •  Ctrl (Windows) or Command (Mac)
  •  Alt (Windows) or Option (Mac)
  •  Shift

Q54. Multileaders are defined with a multileader style, which can have text (MTEXT), a block, or nothing added to the multileader line coming from the arrowhead. When using the block option for multileader content, default blocks are available with attributes for easy annotation; a user block can also be defined. Where does AutoCAD first look for the user blocks that can be used with multileaders?

  •  in a known server folder path
  •  in a known cloud server folder path
  •  in the drawing folder
  •  in the drawing file

Q55. When using the Edit Polyline (PEDIT) command, there may be occasions when you want to join line segments that have a gap. The PEDIT command can close these gaps automatically using a specific workflow. What is that workflow?

  •  When in the PEDIT command, select multiple lines to convert; then when selecting the Join option, you are prompted for a GAPDIST variable. This is the minimum gap distance for automatic joining.
  •  When in the PEDIT command, select multiple lines to convert; then when selecting the Join option, you are prompted for a FUZZ DISTANCE. This is the minimum gap distance for automatic joining.
  •  When in the PEDIT command, select multiple lines to convert; then when selecting the Join option, you are prompted for a MINIGAP DISTANCE. This is the minimum gap distance for automatic joining.
  •  When in the PEDIT command, select multiple lines to convert; then when selecting the Join option, you are prompted for a MIN GAP DISTANCE. This is the minimum gap distance for automatic joining.

Q56. When creating a block with attributes, why should you use underscores between words in the attribute tag?

  •  Attribute tags must have an underscore to be recognized for data extraction.
  •  Attribute tags do not allow spaces.
  •  Attribute tags need an underscore to be recognized by the BLOCK command.
  •  Attribute tags must have an underscore in them.

Q57. To insert a table in a drawing, you use the TABLE command. What is a prerequisite to control a table’s appearance before inserting a table into a drawing?

  •  a table dimension style
  •  a table style
  •  a table layer
  •  a table linetype

Q58. When plotting multiple layouts, you can use the Batch Plotting (PUBLISH) command. What type of file can be saved to retain the batch plotting settings?

  •  Batch Plotting Description (BPD)
  •  file Drawing Publishing Description (DPD)
  •  file Batch Sheet Description (BSD)
  •  file Drawing Set Description (DSD) file

Q59. To create clean, professional plots of your drawings, which object should be set to not plot in the Layer Properties Manager palette?

  •  dimensions
  •  viewports
  •  blocks
  •  text

Q60. Selection cycling can be used to select an object that shares concurrent geometry with another object. Which AutoCAD system variable needs to be used, and what value needs to be set, to ensure that selection cycling is switched on and the dialog box appears?

  •  Press Ctrl+W (Windows) or Command+W (Mac).

Q61. Splines use the NURBS algorithm in AutoCAD. What does NURBS stand for?

  •  Non-Unified Rotated Bend Spline
  •  Non-United Rotational Bend Spline
  •  Non-Uniform Rational Basis Spline
  •  Not Uniform Rotational Build Spline

Q62. You can freeze layers in a current viewport in a layout tab. This is done by activating the viewport and selecting the layers to be frozen either in the Layer drop-down menu or the Layer Properties Manager. Which layer setting makes sure that layers are automatically frozen in any new viewports?

  •  VP Freeze
  •  Freeze in Viewport
  •  Freeze in New Viewport
  •  New VP Freeze

Q63. When using multiline text in a drawing, you can import text from other applications using the Import Text command. Application-neutral text, TXT format, can be imported this way. What other types of text that preserve formatting and fonts can you import?

  •  Simplex (SHX) text
  •  Microsoft Word text in a TrueType (TTF) font
  •  Rich Text Format (RTF) text
  •  any other type of text apart from TXT text

Q64. When using the MOVE command from the right-click shortcut menu, why are you automatically asked to select a base point for your move?

  •  The object(s) is selected automatically after the base point is selected.
  •  The object(s) automatically associates into a group once you have selected the base point.
  •  You are asked to select the object(s) after the base point is selected.
  •  You have already selected the object(s) to move.

Q65. You can use Polar Tracking to rotate objects when using the ROTATE command. What would you need to set to control the angle?

  •  Set the Grid and Snap settings.
  •  Set up the running object snaps.
  •  Set the Polar Tracking increment angle.
  •  Set up object snap tracking.

Q66. When working with annotative text styles and dimension styles in model space, what two values must match for the annotative annotation to display in the corresponding viewports in the layout tab?

  •  annotation scale and linetype scale
  •  linetype scale and viewport scale
  •  annotation scale and viewport scale
  •  insertion scale and annotation scale

Q67. The SCALE command needs a scale factor in order to function. The value has to be a positive integer. If you use a scale factor of 2, what does this value represent?

  •  two times bigger in the X direction (200%
  •  twice as big (200%)
  •  two percent bigger (2%)
  •  half as big (50%)

Q68. Which keys can you press to repeat your last-used AutoCAD command?

  •  the Page Up key or the Page Down key
  •  the R key or the C key
  •  the Tab key
  •  the Spacebar or the Enter (Windows) or Return (Mac) key

Q69. When using the Polyline (PLINE) command to draw an arrowhead, what polyline properties do you need to use?

  •  the Halfwidth setting
  •  starting width and ending widths
  •  polyline start and polyline end
  •  the START and END variables in the PLINE command

Q70. Where do you perform the majority of drawing tasks in AutoCAD?

  •  innerspace
  •  paper space
  •  layout space
  •  model space

Q71. To plot the same drawing with the same settings each time, what needs to be set up in AutoCAD?

  •  the Output tab
  •  the Plot dialog boxt
  •  batch plotting
  •  Page Setup Manager (Windows) or Page Setup (Mac)

Q72. Using the Array command, you have the option to create an associative array. What does this mean?

  •  When dimensioning an array, the dimensions displayed are associative.
  •  The arrayed objects becomes a single entity and, when selected, display as a single entity.
  •  The arrayed objects become associated to the X and Y coordinates used for the array.
  •  The array is associated to the linetype scale.

Q73. When drawing a Start, Center, End arc, which key do you press to draw the arc in a clockwise direction?

  •  C (clockwise)
  •  Alt
  •  D (direction)
  •  Ctrl

Q74. When using the POLYGON command in AutoCAD, you can create an inscribed polygon and a circumscribed polygon. What other type of polygon is available?

  •  side polygon
  •  polyline polygon
  •  line polygon
  •  edge polygon

Q75. When using blocks in a drawing, a selected block displays only one grip: the insertion point. How would you get a block to display all of its associated grips?

  •  Change the GRIPBLOCK system variable to 1.
  •  Select the block and change it in the Properties palette.
  •  Change the GRIPBLOCK system variable to 0.
  •  Select the block and change it in the right-click shortcut menu.

Q76. You create a layer to show an object’s hidden lines, which should be dashed. Which layer property controls if the lines are continuous or dashed?

  •  Linesize
  •  Linestyle
  •  Lineweight
  •  Linetype

Q77. You selected multiple items and four of the items where not supposed to be selected. How do you deselect them?

  •  Hold down Alt (Windows) or Option (Mac) and select the four items.
  •  Hold down CTRL (Windows) or Command (Mac) and select the four items.
  •  Simply select them.
  •  Hold down Shift and select the four items.

Disclaimer:  Hopefully, this article will be useful for you to find all the LinkedIn AutoCAD Skill Assessment Answers and grab some premium knowledge with less effort. If this article really helped you in any way then make sure to share it with your friends on social media and let them also know about this amazing Skill Assessment Test.  the solution is provided by Chase2learn. This tutorial is only for Educational and Learning purpose.

Please share our posts on social media platforms and also suggest to your friends to Join Our Groups. Don’t forget to subscribe. 


What is Linkedin Assessment?

The LinkedIn Skill Assessments feature allows you to demonstrate your knowledge of the skills you’ve added to your profile by completing assessments specific to those skills. LinkedIn skills evaluations are a means to demonstrate the skills of job hunters. This is how LinkedIn Skill Assessments can be used.

Is this Skill Assessment Test is free?

Yes, LinkedIn AutoCAD Skill Assessment is totally free on LinkedIn for you. The only thing is needed i.e. your dedication toward learning.

When I will get Skill Badge?

Yes, if will Pass the Skill Assessment Test, then you will earn a skill badge that will reflect in your LinkedIn profile. For passing in LinkedIn Skill Assessment, you must score 70% or higher, then only you will get your to skill badge.

How to participate in skill quiz assessment?

It’s good practice to update and tweak your LinkedIn profile every few months. After all, life is dynamic and (I hope) you’re always learning new skills. You will notice a button under the Skills & Endorsements tab within your LinkedIn Profile: ‘Take skill quiz.‘ Upon clicking, you will choose your desired skill test quiz and complete your assessment.

LinkedIn Skill Assessments are a series of multiple-choice exams that allow you to prove the skills that are stated in your profile.

How to get Linkedin Skill Badge?

For getting Linkedin Badge in your profile, you need to score at least 70% and above for getting recognition of skill badges.

If you “grade in the 70th percentile or above”—according to LinkedIn—you officially pass and get a LinkedIn skill badge. The social media site will display your badge on your profile.

How long is Skill Assessment valid for?

Skills assessments that do not specify an expiry date are valid for 3 years from the date of the assessment. If more than 3 years have passed by the time the visa application is made, the skills assessment will no longer be valid.

What is the Benefit of Linkedin Skill Assessment?

  • Chances of getting hired will be increased.
  • You will earn Linkedin Skill Badge.
  • Your Linkedin Profile will rank on top.
  • You have a chance to get jobs earlier.
  • This Skill Assessment will enhance your technical skills, helps you to get recognized by top recruiters, and advanced your knowledge by testing your mind.

Who can give this Linkedin Skill Assessment Test?

Any Linkedin User, Any engineer, developer, or programmer, who wants to improve their Programming Skills
Anyone interested in improving their whiteboard coding skills
Anyone who wants to become a Software Engineer, SDE, Data Scientist, Machine Learning Engineer, etc.
Any students in college who want to start a career in Data Science
Students who have at least high school knowledge in math and who want to start learning data structures
Any self-taught programmer who missed out on a computer science degree.

Sharing Is Caring

Leave a Comment